Asbestos Ceiling Removal
Asbestos Ceiling Removal is Conducted as a Class A Asbestos Project. John Kerr of Safety 1st Removals Ltd is a Class A Asbestos Removalist who operates in both the Auckland and Tauranga Area.
John Kerr Director of Safety 1st Removals Ltd explains the 3rd part of Asbestos Ceiling Removal. In Previous Blogs on Asbestos Ceiling Removal I spoke about the process of Setting up encapsulating the whole Removal Area with plastic and the need to make sure you use 200 micron plastic and that this is held up with Strong Tape and Staples.
John Kerr Director of Safety 1st Removals Ltd that operate in Auckland and Tauranga who remove Asbestos. The second blog on Asbestos Ceiling Removal written by John Kerr spoke about the need for Decontamination units the purpose and how many you need. Asbestos Ceiling Removal is Classified Class A under the NZ Asbestos Regulations 2015 and thus you require 3 Decontamination Units and each one has a specific purpose and this was explained by John Kerr of Safety 1st Removals Ltd.
John Kerr Director of Safety 1st Removals Ltd explains the 3rd part of Asbestos Ceiling Removal. In this Blog I will talk about a piece of vital equipment that is needed in the Asbestos Ceiling Removal process. The NPU or Negative Pressure Unit as it is known is a big Extractor Fan and is critical to control the Process of Asbestos Ceiling Removal.
John Kerr Director of Safety 1st Removals Ltd that operate in Auckland and Tauranga who remove Asbestos explains that the NPU is a vital important part of the controls that he puts in place for the Safety of his staff.The NPU or Negative Pressure Unit helps control the amount of dangerous Asbestos Fibres that occur during the Asbestos Ceiling Removal.
John Kerr Director of Safety 1st Removals Ltd explains if you imagine a big extractor fan that removes bad air in commercial buildings and replaces it with good air. The NPU in the Asbestos Ceiling Removal Process does a similar thing but on a smaller basis. The NPU during the Asbestos Ceiling Removal Process has a powerful fan that sucks the Air in the Removal Area into its machine and it has 3 filters that the Air is drawn into and purified then expelled outside of the Removal Area. While this is happening during the Asbestos Ceiling Removal Process it is also sucking in good air and pushing this back into the the Removal Area.
John Kerr Director of Safety 1st Removals Ltd that operate in Auckland and Tauranga who remove Asbestos explains that this whole process is going on during the Asbestos Ceiling Removal process. Thus replacing bad air with good air and while the Asbestos Ceiling Removal is happening the air being expelled from the Removal area is being monitored by special machines set up for this. If they detect a large amount of asbestos fibres then the Asbestos Ceiling Removal is stopped and further control measures is are implemented.
John Kerr Director of Safety 1st Removals Ltd explains the NPU or Negative Pressure Unit is an integral part of the Asbestos Ceiling Removal process. Therefore the right size NPU must be put in place and it must be checked on a regular basis.
The Next Blog will be on the Control Methods that are used for Asbestos Ceiling Removal process to keep it safe for Staff and the Public.
Safe Asbestos Ceiling Removal in Auckland: What Homeowners Need to Know
If you're an Auckland homeowner with asbestos textured ceilings, it's crucial to approach removal with the utmost caution. Asbestos, known for its health risks, requires professional handling. Here's where Safety 1st Projects Ltd and Safety 1st Removals Ltd step in, offering a seamless, safe approach to asbestos removal from your home.
Understanding Asbestos Removal
Asbestos textured ceilings were popular for their durability and fire-resistant properties but were later found to pose severe health risks when disturbed. If your Auckland home dates back a few decades, there's a chance it may contain this hazardous material.
The Professional Approach: Safety 1st
When dealing with asbestos, professional intervention is non-negotiable. Here's how Safety 1st Projects Ltd and Safety 1st Removals Ltd tackle asbestos ceiling removal in your Auckland home:
1. Initial Consultation and Inspection
Safety 1st Projects Ltd begins with a thorough inspection and assessment of your property to confirm the presence and extent of asbestos materials. This initial step ensures that all potential risks are identified, and the necessary safety measures are planned.
2. Planning and Compliance
Following the assessment, a detailed plan is formulated, adhering to New Zealand's strict asbestos removal regulations. This plan outlines the scope of work, safety measures, and timeline to ensure everything is transparent and understood.
3. Preparation and Containment
Safety 1st Removals Ltd takes over the actual removal process. The area is sealed off to prevent asbestos fiber dispersion into other parts of the home. Warning signs and airlock systems are set up to ensure the area is contained and secure.
4. Safe Removal
Specialists dressed in protective gear carefully wet the asbestos materials to minimize dust before removal. They use specialized vacuum cleaners and tools designed for asbestos removal to prevent fiber release into the air.
5. Decontamination and Disposal
After removal, the area undergoes a rigorous decontamination process. Asbestos waste is securely bagged, labeled, and transported to approved disposal facilities, ensuring no risk of contamination to the public or the environment.
6. Final Inspection and Clearance
A final inspection is conducted by an independent licensed assessor to ensure all asbestos has been removed, and the area is safe for reoccupation. Air monitoring may be performed to confirm that the area is free from asbestos fibers.
7. Documentation and Follow-up
Safety 1st Projects Ltd provides homeowners with all necessary documentation, including a clearance certificate and details of the disposal. They ensure that homeowners are informed of every step and are satisfied with the work conducted.
Conclusion
Asbestos removal is not a DIY project; it requires professional expertise, especially when dealing with asbestos textured ceilings. For Auckland homeowners, partnering with Safety 1st Projects Ltd for project management and Safety 1st Removals Ltd for remediation offers peace of mind, ensuring that the removal process is handled safely, effectively, and in compliance with local regulations. By choosing the right professionals, you can ensure the safety of your home and your loved ones.